MQ-2 MQ2 Smoke Gas LPG Butane Hydrogen Gas Sensor Detector Module

MQ-2 MQ2 Smoke Gas LPG Butane Hydrogen Gas Sensor Detector Module
MQ-2 MQ2 Smoke Gas LPG Butane Hydrogen Gas Sensor Detector ModuleMQ-2 MQ2 Smoke Gas LPG Butane Hydrogen Gas Sensor Detector ModuleMQ-2 MQ2 Smoke Gas LPG Butane Hydrogen Gas Sensor Detector Module
รหัสสินค้า S0049
หมวดหมู่ เซ็นเซอร์แก๊ส
ราคา 90.00 บาท
น้ำหนัก 8.2 กรัม
สถานะสินค้า พร้อมส่ง
ลงสินค้า 4 ธ.ค. 2562
อัพเดทล่าสุด 3 ธ.ค. 2563
คงเหลือ 9 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Specific

MQ-2 gas sensor sensitive material used in the clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-2 gas sensor high on gas, propane, hydrogen sensitivity of detection of natural gas and other flammable vapors are also very good. This sensor can detect a variety of flammable gas, is a low-cost sensors for a variety of applications. 
 
Gas may be used in homes and factories leakage monitoring device suitable for the detection of gas, butane , propane , methane , smoke , etc. 
 
 
 
Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
The switching signal having a DO (TTL) output and analog output AO ;
TTL output valid signal is low . ( Low-level signal when the output light can be directly connected to the microcontroller or relay module )
Analog output voltage with the higher concentration of higher voltage.
A gas, natural gas, city gas , smoke better sensitivity.
There are four screw holes for easy positioning ;
Has a long life and reliable stability
Rapid response and recovery characteristic
Input voltage : DC5V Power consumption ( current ): 150mA
DO output : TTL digital 0 and 1 ( 0.1 and 5V)
AO output :0.1-0 .3 V ( relative to pollution ) , the maximum concentration of a voltage of about 4V
Special note: After the sensor is powered , needs to warm up around 20S, measured data was stable , heat sensor is a normal phenomenon , because the internal heating wire , if hot is not normal .
 
VCC: positive power supply (5V)
GND: power supply is negative
DO: TTL switching signal output
AO: analog signal output
Package included:
100% Brand New
 
1set x  MQ-2 

วิธีการชำระเงิน

ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขามีนบุรี ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขาเดอะมอลล์ บางกะปิ ออมทรัพย์

หน้าที่เข้าชม419,689 ครั้ง
ผู้ชมทั้งหมด257,597 ครั้ง
เปิดร้าน5 มิ.ย. 2560
ร้านค้าอัพเดท4 ก.ย. 2568
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านmcu2robot
mcu2robot
ร้าน MCU2ROBOT ขายบบอร์ด Arduino รุ่นต่างๆ เช่น arduino uno, arduino mega2560, arduino nano 3.0 ราคาถูก เป็นต้น และยังขายอุปกรณ์สำหรับทำหุ่นยนต์(robot)แบบต่างๆ เช่น หุ่นยนต์สำรวจ, โดรน, เครื่องบิน, แขนหุ่นยนต์, mini CNC, 3D Printer เป็นต้น โดยมีอุปกรณ์ตั้งแต่ เซ็นเซอร์สำหรับ arduino, พูลเล่ย์สายพาน, สายพาน, ล้อหุ่นยนต์, ลีดสกรู, ลูกปืน, optical axis, bearing, bread board, โมดูลต่างๆ, รีเลย์, GSM, GPS, มอเตอร์, power supply, สายไฟ, จอ LCD, resistor, capacitor ราคาถูก เป็นต้น และให้คำปรึกษาเกี่ยวกับการใช้งานอุปกรณ์ต่างๆอย่างละเอียด เราคัดสินค้าที่ดีที่สุดจากแหล่งที่ถูกที่สุดส่งตรงถึงบ้านคุณโดยที่ไม่ต้องเสียเวลาเดินทางและค่าเดินทาง โดยมีค่าจัดส่งราคาถูกและส่งสินค้าหลังจากมีการชำระเงินทันที www.mcu2robot.com FB: arduino2robot Line ID: arduino2robot
เบอร์โทร :
อีเมล : chawee2410@hotmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม